G600

Optimal structural design

  • Main mechanical structures, such as: base, column, saddle, etc., are made of Meehanite casting iron with the process of heat treatment to release the residual stress to ensure every actual miniature movement and to maintain a long-lasting accuracy.
  • An integrated bridge-like design of column and beam constitutes the best structural rigidity by which the spindle provides stable cutting ability.
  • The design with 3-axis roller-type high-precision linear guide-ways acquires a quick response in acceleration and deceleration.
  • 3-axis ballscrews, being pre-stretched, can effectively refrain from the thermal deformation and surely guarantee the precise positioning accuracy and repeatability accuracy.

Feature of graphite cutting machine

  • The fully-enclosed cover apparently reduces the contamination by graphite particles/dusts.
  • The vacuum intake for graphite particle is right by the side of the table to powerfully remove the graphite particles by suction, to keep it clean and to keep the service life of ballscrew and transmission device longer.
  • Instead of oil lubrication, the grease lubrication with higher viscosity is applied for graphite cutting so as not to drop oil onto the workpiece (avoiding from the contamination by oil onto the workpiece.

Automatic Tool change

  • 20-tool, umbrella-type, tool magazine
  • The automatic ATC door is specially designed to effectively isolate the contamination of graphite particles/dusts and to assure the service life of the ATC and tools.

Built-in Spindle

  • With the characteristic of high precision and high stability, the spindle is professionally made.
  • The cooling system on the spindle makes sure the temperature stability in spindle operation and restrains from the thermal deformation on the spindle to optimize the machining accuracy.
Items Unit G600
Travel
X axis mm 600
Y axis mm 600
Z axis mm 350
Distance from spindle nose to table mm 120-470
Distance between columns mm 680
Table
Dimension mm 600 x 600
Max. load kg 500
T-slot (width x pitch x number) mm 14 x 100 x 6
Spindle
Spindle type - Built-in 
Spindle speed rpm 30000
Motor power (cont./S6-10%) kW 12 /15
Spindle taper - HSK-E40
Feed Rate
Rapid traverse(X / Y / Z) m/min 24 / 24 / 18
Cutting feed rate mm/min  12000
Motor power (X / Y / Z) kW 1.6 / 1.6 / 3.0
ATC
ATC type -  Umbrella
Magazine capacity pcs 20T
Max. tool diameter / next pocket empty mm 75 / 100
Max. tool length mm 200
Max. tool weight kg 1.5
Space & System Requirement
Pneumatic pressure kgf/cm² 6
Electrical power consumption kVA 30
Machine net weight kg 5500
A. Standard Accessories B. Optional Accessories
1. FANUC 0iMF-Plus controller 1. FANUC 31iMB controller
2. 30000 rpm, HSK-E40, built-in type spindle  2. 3-Axis ballscrew cooling
3. 20T, HSK-E40, Umbrella type ATC  3. Linear scales (X/Y/Z)
4. Graphite vacuum system 4. Workpiece measurement system
5. Grease lubrication system to ballscrews 5. Tool length measurement system
6. Spindle air blast 6. Transformer
7. Cutting air blast 7. CE Certificated
8. Spindle oil cooler 8. Spindle thermal compensation
9. Automatic centralized lubrication system 9. Graphite cutting package
10. Full chip enclosure    
11. 3-axis absolute encoder motors    
12. 3-Color signal light    
13. Working lamp     
14. Manual pulse generator (MPG)    
15. Ethernet card & RS-232C interface    
16. Heat exchanger for electrical cabinet    
17. Tool kits    
18. Leveling block and screws    
19. Operation manuals  

 

20. Air gun  

 

More

G Series