PV66

High Rigid and High Stable Structure

  • Bed, columns, saddle and other main castings are made of Meehanite grade cast iron and remove the internal stress by heat treatment to ensure the best structural stability and positioning accuracy.
  • Bed is one-piece casting designed to provide high rigidity and stability.
  • Table is hand scraped to optimize accuracy and stability.
  • Non-counter balance on spindle head allows high speed and quick response.
  • 3- axis are equipped with roller type linear guideways to provide quick response and high acceleration and deceleration.
  • 3-axis ballscrews and linear guideways are lubricated by automatic centralized lubrication system.

User Friendly Design

  • Full enclosure (includes tool magazine) provides a safe and clean operating environment.
  • The swivel operation panel allows users to operate with great convenience.
  • Large window design on the door enables users to observe the machining clearly.
  • The wider width of door opening makes workpiece easier to be loaded and unloaded.
  • Large side windows make the machining of long workpiece more convenient.
  • The designs of tilting bed surface with flushing coolant system can provide perfect performance of chip-removal.
  • The optional chain type or scraper type chip conveyor could remove chips into chip bucket automatically.
Items Unit PV66
Travel
X axis mm 660
Y axis mm 406
Z axis mm 508
Distance from spindle nose to table mm 102 - 610
Table
Dimension mm 762 x 406
Max. table load kg 500
T-slot (width x pitch x number) mm 18 x 100 x 3
Spindle
Spindle type - Direct drive
Spindle speed rpm 12000
Spindle motor power (cont./30 min rated) kW 7.5/15
Spindle taper - BBT40
Feed Rate
Rapid traverse(X/Y/Z) m/min 48 / 48 / 48 (Mitsubishi)
Cutting feed rate mm/min 12000
Motor power (X/Y/Z) kW 1.8/1.8/2.5
ATC
ATC type -  Disc type
Magazine capacity pcs 20
Max. tool diameter / adjacent pocket empty mm 80 / 120
Max. tool length mm 240
Max. tool weight kg 7
Space & System Requirement
Pneumatic pressure kgf/cm² 6
Electrical power consumption kVA 25
Machine net weight kg 2818
A. Standard Accessories B. Optional Accessories
1. Fanuc 0iMF-Plus 10.4" 1. Mitsubishi M80A 10.4"
2. 12000rpm, #40, Direct drive spindle 2. Coolant through spindle (30bar)
3. 20T, #40, Arm type  3.

Oil skimmer

4. Spindle air blast 4.

Oil mist device

5. Cutting air blast 5. Oil mist collector
6. Spindle oil cooler 6. Workpiece measurement system
7. Cutting coolant system 7. Tool length measurement system
8. Automatic centralized lubrication system 8. Belt type chip conveyor
9. Working lamp 9. Scraper type chip conveyor
10. Indication lamp 10. Transformer
11. Washing gun & air gun 11. CE mark (CE region only)
12. Coolant flushing system    
13. Coolant tank     
14. Manual pulse generator ( MPG )    
15. Ethernet & RS-232C interface    
16. Heat exchanger for electrical cabinet    
17. Tool kits    
18. Leveling bolts & pads    
19. Operation manuals    
20. One-year machine warranty
(Spindle warranty upon spindle manufacturer)
   
21.

Controller warranty
(Controller warranty upon controller manufacturer)

   

More

PV Series-Linear Guideways