Good C/P ration (cost/performance)
integrated with A- and C-axis rotary-&-tilting table, a C-frame 3-axis machining center is upgraded to 5-face machining capability, an economical choice for complicated but middle- or small-sized workpiece.
Stable structure rigidity
the columns and the machine base are designed with wide spans, and the motor mount, the bearing mount and the casting iron are of one-piece design which greatly increase the integral rigidity.
High efficiency
linear guideways for 3 axes are of roller-type, with the characteristics of the fast traverse, low friction coefficient and high rigidity. The rapid traverse to X- and Y-axis is up to 36 m/min.
High-performance spindle
the high-speed direct-drive spindle, 15Krpm, as a standard spindle, with 9/15KW spindle motor, can meet various machining demands.
Avoiding from the cumulative deviations resulting from multi machining procedures, it can greatly shorten the machining time to practically achieve high-speed, high-accuracy and high-efficiency requirements.
For the deeper machining on the die-&-mold, it will be easier to find and to set the tools at its suitable angle and position, and obviously shorten the clamping length on the tool by which obtains the optimal cutting efficiency and accuracy.
Items | Unit | UC250x |
Travel | ||
X axis | mm | 440 |
Y axis | mm | 520 |
Z axis | mm | 610 |
Distance From Spindle Nose to Table | mm | 65 - 675 |
Table | ||
Table Dimension | mm | ø250 |
Table Loading Capacity | Kg | 0°: 100kg / 90° :75kg |
T-slot (width x number) | mm | N°4 WIDTH 12 - 90° |
Spindle | ||
Spindle Type | - | In-line |
Spindle Speed | rpm | 15,000 |
Spindle Motor Power | kW | 9/15 kW(S3-25%) |
Spindle Taper | - | BBT40 |
Feed Rate | ||
Rapid Traverse(X/Y/Z) | m/min | 36 / 36 / 24 |
Cutting Feed Rate | mm/min | 12000 |
Swiveling axis | ||
Rotary Table Diameter | mm | ø250 |
Rotation Range | degree | 360 |
Positioning Accuracy | second | ±5 |
Rotation Speed | rpm | 33.3 |
Rotation Torque | Nm | 720 |
Turning axis | ||
Rotation Range | degree | +30° ~-120° |
Positioning Accuracy | second | ±5 |
Rotation Speed | rpm | 22.5 |
Rotation Torque | Nm | 1080 |
ATC & Tool Magazine | ||
Tool Magazine Type | - | Arm Type |
Magazine Capacity | pcs | 24 |
Max. Tool Diameter : (Adjacent pots Empty) | mm | 75 / 125 |
Max. Tool Length | mm | 280 |
Max. Tool Weight | Kg | 7 |
Space & System Requirement | ||
Coolant Tank Capacity | liters | 280 |
Pneumatic Pressure | kgf/cm² | 6 |
Electrical Power Consumption | kVA | 40 |
Machine Net Weight | Kg | 6,700 |
A. Standard Accessories | B. Optional Accessories | ||
1. | Fanuc 0iMF-Plus controller | 1. | Fanuc 31iMB / Heidenhain TNC620 / Takumi PC Console |
2. | 15000 rpm, BBT40 in line spindle | 2. | 32T |
3. | 24T, arm type ATC | 3. | 3-axis linear scales |
4. | Rotary Encoder for rotary axis | 4. | Air conditioner for electrical cabinet (Heidenhain) |
5. | Spindle oil grease lubrication | 5. | Scraper type chip conveyor |
6. | Spindle cooling system | 6. | Steel type chip conveyor |
7. | Centralized automatic lubrication system | 7. | Air through spindle system |
8. | Air blast through spindle taper | 8. | Coolant through spindle system (30bar) |
9. | Cutting coolant system | 9. | Cutting oil mist cooling device |
10. | Full enclosed splash guard | 10. | Oil mist collection device |
11. | Washing gun & air gun | 11. | Spindle thermal compensation system |
12. | Coolant tank & coolant flushing system | 12. | Automatic tool length measurement system |
13. | Auger type chip conveyor | 13. | Automatic workpiece measurement system |
14. | Oil skimmer | 14. | Safety door |
15. | Working lamp | 15. | Transformer |
16. | 3-color signal lamp | ||
17. | Heat Exchanger | ||
18. | Foundation pads & bolts kits | ||
19. | Tool kits | ||
20. | Operation manuals | ||
21. | CE certification |