High-rigidity and high-precision mechanical structure

  • Main mechanical structures, such as: base, column, saddle, etc., are made of Meehanite casting iron with the process of heat treatment to release the residual stress to ensure every actual miniature movement and to maintain a long-lasting accuracy.
  • Box-shaped structural design on beam, together with ladder-like layout of linear guideway makes the combining span of saddle wider and assures a powerful and stable machining capability on the spindle.
  • The design with 3-axis roller-type high-precision linear guide-ways acquires a quick response in acceleration and deceleration and gets the rapid traverse up to 32 m/min.
  • 3-axis ballscrews, being pre-stretched, can effectively refrain from the thermal deformation and surely guarantee the precise positioning accuracy and repeatability accuracy.

No-counterbalance design on headstock

  • The no-counterweight structural design on headstock is without stagnant phenomenon caused by inertia and no vibration resulted from the counterweight, but with the agile, quick and stable response in feed.
  • Z-axis linear guideway with 6 blocks ensures good accuracy in long-term operation and long service hours.

High-precision and high-performance spindle

  • Embedded automatic thermal compensation appliance (Opt. on IBAG spindle) can effectively refrain from the thermal deformation and surely guarantee the accuracy.
  • The cooling system on the spindle makes sure the temperature stability in spindle operation and restrains from the thermal deformation on the spindle to optimize the machining accuracy.

Chip flushing function and oil-skimmed design

  • The inclined-plane design on the chassis, together with the flushing coolant system on both rear sides, makes chip removed effective.
  • Oil-skimmed design – the water tank with oil skimmer makes the service life of coolant longer.

Automatic Tool change

  • 20-tool, umbrella-type, tool magazine
  • 30-tool, cam-type, tool magazine, optional
Items Unit H16
X axis mm 1600
Y axis mm 1300
Z axis mm 700
Distance from spindle nose to table mm 200 - 900
Distance between columns mm 1500
Dimension mm 1900 x 1300
Max. load kg 6000
T-slot (width x pitch x number) mm 22 x 160 x 8
Spindle type - Direct-drive
Spindle speed rpm 15000
Motor power (cont./30 min ) kW 15 / 18.5
Spindle taper - BBT40
Feed Rate
Rapid traverse(X / Y / Z) m/min 30 / 30 / 30
Cutting feed rate mm/min  1~20000
Motor power (X / Y / Z) kW 14 / 5.5 / 5.5
ATC type -  Armless
Magazine capacity pcs 20
Max. tool diameter / next pocket empty mm 120 / 160
Max. tool length mm 300
Max. tool weight kg 7
Tool shank - BBT40
Pull stud - MAS 1
Space & System Requirement
Pneumatic pressure kgf/cm² 6
Electrical power consumption kVA 75
Machine net weight kg 20000
Max. floor space (W x L x H) mm 4650 x 4400 x 4000
A. Standard Accessories B. Optional Accessories
1. FANUC 31iMB controller 1. HEIDENHAIN TNC620/TNC640 controller
2. 15000rpm, BBT40, built - in type spindle  2. MITSUBISHI M830 controller
3. 20T, BBT40, armless type ATC 3. 10000 rpm, BBT50, direct - drive type spindle
4. Spindle air blast 4. 20000 rpm, HSKA63, Built - in type spindle
5. Cutting air blast 5. 24000rpm, HSKA63, Built - in type spindle(IBAG)
6. Spindle oil cooler 6. 30 / 48 / 60 T, BBT40,arm type ATC
7. Cutting coolant system 7. 32 / 60 T, BBT50,arm type ATC
8. Centralized automatic lubrication system(oil) 8. Coolant through spindle
9. 3 axes absolute encoder motors 9. Spindle thermal compensation system(For IBAG spindle only)
10. Fully enclosed splash guard 10. Ball screw cooling system
11. Working lamp 11. Oil mist device
12. Indication lamp 12. Oil mist collector
13. Washing gun & air gun 13. Linear scales(3 axes)
14. Oil skimmer 14. Workpiece measurement system
15. Coolant tank & coolant flushing system 15. Tool length measurement system
16. Steel belt type chip conveyor 16. Rotary table(The 4th / 5th axis)
17. Manual pulse generator(MPG) 17. Scraper type chip conveyor
18. Ethernet & RS - 232C interface 18. Transformer
19. Air conditioner for electrical cabinet 19. CE(CE area only)
20. Tool kits    
21. Anchor bolts, leveling blocks and bolts    
22. Operation manuals    

One - year machine warranty

(Spindle warranty upon spindle manufacturer)


Controller warranty

(Controller warranty upon controller manufacturer)



H Series