H22T

High-rigidity and high-precision mechanical structure

  • Main mechanical structures, such as: base, column, saddle, etc., are made of Meehanite casting iron with the process of heat treatment to release the residual stress to ensure every actual miniature movement and to maintain a long-lasting accuracy.
  • Box-shaped structural design on beam, together with ladder-like layout of linear guideway makes the combining span of saddle wider and assures a powerful and stable machining capability on the spindle.
  • The design with 3-axis roller-type high-precision linear guide-ways acquires a quick response in acceleration and deceleration and gets the rapid traverse up to 20/16/20 m/min.
  • 3-axis ballscrews, being pre-stretched, can effectively refrain from the thermal deformation and surely guarantee the precise positioning accuracy and repeatability accuracy.

No-counterbalance design on headstock

  • The no-counterweight structural design on headstock is without stagnant phenomenon caused by inertia and no vibration resulted from the counterweight, but with the agile, quick and stable response in feed.
  • Z-axis linear guideway with 6 blocks ensures good accuracy in long-term operation and long service hours.

High-precision and high-performance spindle

  • Embedded automatic thermal compensation appliance (Opt. on IBAG spindle) can effectively refrain from the thermal deformation and surely guarantee the accuracy.
  • The cooling system on the spindle makes sure the temperature stability in spindle operation and restrains from the thermal deformation on the spindle to optimize the machining accuracy.

Chip flushing function and oil-skimmed design

  • The inclined-plane design on the chassis, together with the flushing coolant system on both rear sides, makes chip removed effective.
  • Oil-skimmed design – the water tank with oil skimmer makes the service life of coolant longer.

Automatic Tool change

  • 20-tool, umbrella-type tool magazine
Items Unit H22T
Travel
X axis mm 2200 
Y axis mm 2200 
Z axis mm 800 
Distance from spindle nose to table mm

150-950

Distance between columns mm 2350 
Table
Dimension mm 2400 x 2100
Max. load kg 8000 
T-slot (width x pitch x number) mm 22 x  200  x 10
Spindle
Spindle type - Direct drive
Spindle speed rpm 12000 
Motor power (cont./S3-25%)(Fanuc control) kW 22 / 35
Spindle taper - BBT50
Feed Rate
Rapid traverse(X / Y / Z) m/min 20 / 16 / 20
Cutting feed rate mm/min  1~12000
Motor power (X / Y / Z) kW 9.0 / 9.0 / 6.0
ATC
ATC type -  Armless
Magazine capacity pcs 20 
Max. tool diameter / next pocket empty mm 105 / 150
Max. tool length mm 300 
Max. tool weight kg
Tool shank - BBT50
Pull stud - MAS 1
Space & System Requirement
Pneumatic pressure kgf/cm²
Electrical power consumption kVA 75 
Machine net weight kg 31000 
Max. floor space (W x L x H) mm 5460  x  6740 x 3950
A. Standard Accessories B. Optional Accessories
1. FANUC 0iMF Plus controller 1. HEIDENHAIN TNC620/TNC640 controller
2. 12000 rpm, BBT50, Direct-drive type spindle 2. FANUC 31iMB controller
3. 20T, BBT0, armless type ATC  3. 15000rpm, BBT40, Direct Drive Spindle 
4. Spindle air blast 4. 30 / 32 / 48T arm type ATC
5. Cutting air blast 5. Coolant through spindle (30/70 bar)
6. Spindle oil cooler 6. Spindle thermal compensation system(PT-100)
7. Cutting coolant system 7. Ball screw cooling system
8. Centralized automatic lubrication system(oil) 8. Oil mist device
9. 3 axes absolute encoder motors 9. Oil mist collector
10. Fully enclosed splash guard 10. Linear scales(3 axes)
11. Working lamp 11. Workpiece measurement system
12. Indication lamp 12. Tool length measurement system
13. Washing gun & air gun 13. Scraper type chip conveyor 
14. Oil skimmer 14. Transformer
15. Coolant tank & coolant flushing system 15. CE(CE area only)
16. Steel belt type chip conveyor     
17. Manual pulse generator(MPG)    
18. Ethernet & RS-232C interface    
19. Air conditioner for electrical cabinet    
20. Tool kits    
21. Anchor bolts, leveling blocks and bolts    
22. Operation manuals    
23.

One-year machine warranty

(Spindle warranty depends upon spindle manufacturer)

   
24.

Controller warranty

(Controller warranty depends upon controller manufacturer)

   

More

H Series