Optimal structural design
Characteristic of graphite cutting machine
Automatic Tool change
Built-in Spindle
Items | Unit | G1000 |
Travel | ||
X axis | mm | 1020 |
Y axis | mm | 700 |
Z axis | mm | 500 |
Distance from spindle nose to table | mm | 180 - 680 |
Distance between columns | mm | 1080 |
Table | ||
Dimension | mm | 1050 x 700 |
Max. load | kg | 800 |
T-slot (width x pitch x number) | mm | 18 x 125 x 6 |
Spindle | ||
Spindle type | - | Built-in |
Spindle speed | rpm | 18000 |
Motor power (cont./S3-25%) | kW | 18.5 / 30 |
Spindle taper | - | HSK-A63A |
Feed Rate | ||
Rapid traverse(X / Y / Z) | m/min | 32 / 32 / 32 |
Cutting feed rate | mm/min | 20000 |
Motor power (X / Y / Z) | kW | 4.5/4.5/4.5 |
ATC | ||
ATC type | - | Umbrella |
Magazine capacity | pcs | 16T |
Max. tool diameter / next pocket empty | mm | 105 / 120 |
Max. tool length | mm | 250 |
Max. tool weight | kg | 3 |
Space & System Requirement | ||
Pneumatic pressure | kgf/cm² | 6 |
Electrical power consumption | kVA | 50 |
Machine net weight | kg | 9100 |
A. Standard Accessories | B. Optional Accessories | ||
1. | FANUC 0iMF-Plus controller | 1. | FANUC 31iMB controller |
2. | 18000 rpm, HSK-A63, built-in type spindle | 2. | 25000rpm, HSK-E50, built-in spindle |
3. | 16T, Umbrella type ATC | 3. | 3-Axis ballscrew cooling |
4. | Graphite vacuum system | 4. | Linear scales (X/Y/Z) |
5. | Grease lubrication system to ballscrews | 5. | Workpiece measurement system |
6. | Spindle air blast | 6. | Tool length measurement system |
7. | Cutting air blast | 7. | Transformer |
8. | Spindle oil cooler | 8. | CE Certificated |
9. | Automatic centralized lubrication system | 9. | 30T, HSK-A63 |
10. | Full chip enclosure | 10. | Spindle thermal compensation |
11. | 3-axis absolute encoder motors | 11. | Graphite Cutting Package |
12. | 3-Color signal light | ||
13. | Working lamp | ||
14. | Manual pulse generator (MPG) | ||
15. | Ethernet card & RS-232C interface | ||
16. | Heat exchanger for electrical cabinet | ||
17. | Tool kits | ||
18. | Leveling block and screws | ||
19. | Operation manuals |
|
|
20. | Air gun |
|