H10

High-rigidity and high-precision mechanical structure

  • Main mechanical structures, such as: base, column, saddle, etc., are made of Meehanite casting iron with the process of heat treatment to release the residual stress to ensure every actual miniature movement and to maintain a long-lasting accuracy.
  • Box-shaped structural design on beam, together with ladder-like layout of linear guideway makes the combining span of saddle wider and assures a powerful and stable machining capability on the spindle.
  • The design with 3-axis roller-type high-precision linear guide-ways acquires a quick response in acceleration and deceleration and gets the rapid traverse up to 32 m/min.
  • 3-axis ballscrews, being pre-stretched, can effectively refrain from the thermal deformation and surely guarantee the precise positioning accuracy and repeatability accuracy.

No-counterbalance design on headstock

  • The no-counterweight structural design on headstock is without stagnant phenomenon caused by inertia and no vibration resulted from the counterweight, but with the agile, quick and stable response in feed.
  • Z-axis linear guideway with 4 blocks ensures good accuracy in long-term operation and long service hours.

High-precision and high-performance spindle

  • Embedded automatic thermal compensation appliance (Opt. on IBAG spindle) can effectively refrain from the thermal deformation and surely guarantee the accuracy.
  • The cooling system on the spindle makes sure the temperature stability in spindle operation and restrains from the thermal deformation on the spindle to optimize the machining accuracy.

Chip flushing function and oil-skimmed design

  • The inclined-plane design on the chassis, together with the flushing coolant system on both rear sides, makes chip removed effective.
  • Oil-skimmed design – the water tank with oil skimmer makes the service life of coolant longer.

Automatic Tool change

  • 16-tool, umbrella-type, tool magazine
  • 30-tool, cam-type, tool magazine, optional

 

Items Unit H10
Travel
X axis mm 1020
Y axis mm 700
Z axis mm 500
Distance from spindle nose to table mm 180 - 680
Distance between columns mm 1080
Table
Dimension mm 1050 x 700
Max. load kg 800
T-slot(width x pitch x number) mm 18 x 125 x 6
Spindle
Spindle type - Direct-drive
Spindle speed rpm 15000
Motor power(cont./30 min ) kW 15 / 18.5
Spindle taper - BBT40
Feed Rate
Rapid traverse(X / Y / Z) m/min 32 / 32 / 32
Cutting feed rate mm/min  1~20000
Motor power(X / Y / Z) kW 4.5 / 4.5 / 4.5
ATC
ATC type -  Armless
Magazine capacity pcs 16
Max. tool diameter / next pocket empty mm 105 / 120
Max. tool length mm 270
Max. tool weight kg 7
Tool shank - BBT40
Pull stud - MAS 1
Space & System Requirement
Pneumatic pressure kgf/cm² 6
Electrical power consumption kVA 50
Machine net weight kg 9100
Max. floor space(W x L x H) mm 3400 x 4300 x 3050
A. Standard Accessories B. Optional Accessories
1. FANUC 31iMB controller 1. HEIDENHAIN TNC620/TNC640 controller
2. 15000rpm, BBT40, built - in type spindle  2. MITSUBISHI M830 controller
3. 16T, BBT40, armless type ATC 3. 20000 rpm, HSK63A, Built - in type spindle
4. Spindle air blast 4. 24000rpm, HSK63A, Built - in type spindle(IBAG) 
5. Cutting air blast 5. 30T,BBT4, arm type ATC 
6. Spindle oil cooler 6. Coolant through spindle 
7. Cutting coolant system 7. Spindle thermal compensation system(For IBAG spindle only)
8. Centralized automatic lubrication system(oil) 8. Ball screw cooling system
9. 3 axes absolute encoder motors 9. Oil mist device
10. Fully enclosed splash guard 10. Oil mist collector
11. Working lamp 11. Linear scales(3 axes)
12. Indication lamp 12. Workpiece measurement system
13. Washing gun & air gun 13. Tool length measurement system
14. Oil skimmer 14. Rotary table(The 4th / 5th axis)
15. Coolant tank & coolant flushing system 15. Steel belt type chip conveyor
16. Manual pulse generator(MPG) 16. Scraper type chip conveyor
17. Ethernet & RS - 232C interface 17. Transformer
18. Air conditioner for electrical cabinet 18. CE(CE area only)
19. Tool kits    
20. Anchor bolts, leveling blocks and bolts    
21. Operation manuals    
22.

One - year machine warranty
(Spindle warranty upon spindle manufacturer)

   
23.

Controller warranty
(Controller warranty upon controller manufacturer)

   

More

H Series